FIRE EXTINGUISHERS REFILLING
Every Ceasefire Fire Extinguisher that comes to us for a refill undergoes the following standard process…
1. The Fire Extinguisher is manually discharged / fired and emptied. | 2. The extinguisher is then dismantled completely; cylinder is de-stressed. | 3. The cylinder then is made to undergo a Hydro Static Pressure Test at 30kgf cm sq for 2 minutes check for leaks and the burst capacity. | 4. The cylinder undergoes the fresh painting process by first, Static Charge Powder coating and then baking in Oven at 180 degrees for 15 minutes. | 8. The Fire Extinguisher is then made to go through Leak tests. The first is an inverted beaker test in water. |
5. New extinguishing agent (powder, gas, water or foam) is filled in the cylinder through a vacuum based process that fills the cylinder with exact quantity of extinguishing agent. | 6. New Discharge fitment mechanism including all new rubber seals, O rings, and hose pipe (EPDM with 50 kg burst capacity) are attached. | 7. Fire extinguisher is charged (pressurized) with 99.99% pure nitrogen mixed with helium. |